You are browsing documentation for a version other than the latest stable release. Switch to the latest stable release, 1.1.
As described in the architecture overview Mender uses the output from a build system and deploys this to remote devices.
In order to ensure a robust update process, Mender needs additional metadata alongside the raw bits of the file system, most notably:
Furthermore, as new use cases and platforms are supported in the future, even more metadata and files are expected to be needed as part of the Mender deployment process. The file system image itself can not contain this information, so additional logic is required.
To handle the requirements mentioned above, Mender defines and uses a
specific file format, identified by its
.mender suffix. A file in this format
is referred to as a Mender Artifact, or simply an Artifact.
All relevant components of Mender, such as the client and server, understand
and use (only) this specific file format when working with software deployments.
The diagram below shows an example of the main attributes and structure of a Mender Artifact file.
Internally, a Mender Artifact is simply a file archive in the tarball format. It contains several files for incorporating versioning, extensions and metadata, as well as the main file: the root file system.
The tar format supports streaming, which Mender takes advantage of. As a Mender Artifact is downloaded from the Mender server or external storage, the Mender client streams the root file system within it directly to the inactive partition, without needing any temporary storage for unpacking it before it is written. This drastically reduces storage requirements for the update process, improves performance and reduces flash wear.
To enable streaming and control based on metadata, like aborting the download if the Artifact is not compatible with the device, the Mender Artifact itself is not compressed. Instead, the root file systems within Artifacts are compressed, currently with the gzip compression algorithm.
The easiest and most common way to generate Mender Artifacts is by adding the meta-mender layer to your Yocto Project build environment. There is more information on how to do this as part of the tutorial Building a Mender Yocto Project image.
Although it is possible to use a tar utility to extract, modify and package Mender Artifacts, this is error-prone due to the amount of details that need to be handled, like the ordering of the files, contents of metadata and checksum computation. For this reason, it is recommended to use the Mender Artifact utility or Go library when you need to work with Mender Artifacts. The Mender Artifacts library and utility is available as open source in the Mender Artifacts repository and there is a tutorial using the utility at Modifying a Mender Artifact.