In this tutorial we will show how to use the intuitive Mender server UI to deploy a full rootfs image update to a virtual device which is connected to the server. The virtual device is bundled with the Mender server to make it easy to test Mender.
A Mender Artifact is a file format that includes metadata like the checksum and name, as well as the actual root file system that is deployed. See Mender Artifacts for a complete description of this format.
The test environment should be set up and working successfully as described in Create a test environment.
After a minute or two, there should be a virtual device that is waiting authorization. This means that the Mender client, which runs as a daemon on the device, is asking to join the Mender server so that the server can manage its deployments. You can also see these requests in the server access logs in the terminal where you started the Mender server.
You can review the device before authorizing it to join the server. When you are ready, simply click the Authorize button in the Devices tab.
There are security implications to connecting a client and server for the first time, also known as bootstrapping. If a client and server have not exchanged any information in advance, they need to accept each other on trust this first time, with the risk that the information the other party presents is spoofed. To mitigate this risk, the Mender client preinstalls the TLS certificate of the server when it is provisioned, as part of the Yocto Project image build. So it is not possible for a rogue server to intercept the connection from a client or pretend to be a different server, assuming server's private TLS key is securely managed. A rogue device can still spoof the information it sends to the server in order to be authorized, and this is why Mender asks you to make the authorization decision. However, the risk of letting the server manage a rogue device is much lower than the risk of a rogue server managing devices.
Mender automatically collects identity and inventory information about the connected devices. You can view this information by clicking on a device. It should look similar to the following:
You can also see that the
After deploying the update below, you can verify that this
artifact_name has changed.
The device console can be seen by running
sudo docker logs $(sudo docker ps | grep mender-client | cut -f1 -d' ').
Before we can deploy a new Artifact to devices, it needs to be uploaded to the server. Any Artifact that can be used, and steps to build one are provided at Building a Mender Yocto Project image.
To make testing easier, a Mender Artifact that can be used with the virtual device is provided for download at https://d1b0l86ne08fsf.cloudfront.net/1.0.0/vexpress-qemu/vexpress_release_2.mender.
After the download finishes, go back to the Mender server UI,
click the Artifacts tab and upload this Mender Artifact.
You can set the Description input field to
My test build,
it is just informational to make to make it is easier to
recognize Artifacts after they have been uploaded.
In the UI it should look something like this:
All devices report which Device type they are as part of their inventory information, for example
beaglebone. In addition, Mender Artifacts have Device types compatible as part of their metadata. During a deployment, Mender makes sure that a device will only get and install an Artifact it is compatible with. This increases the robustness of Mender as it avoids situations like deploying software that is not supported by the device hardware.
Now that we have the device connected and the Artifact uploaded to the server, all that remains is to go to the Deployments tab and click Create a deployment.
You will be asked which Artifact to deploy and which group of devices to deploy it to. Since we have just one Artifact and no custom groups right now, we simply select the Artifact we just uploaded and All devices, then Create deployment.
As the deployment progresses, you can click on it to view more details about the current status across all devices. In the example below, we can see that the device is in process of installing the Artifact.
The deployment to the virtual device should take about 2-5 minutes to complete and report success or failure.
Once the deployment completes, you should see it in Past deployments.
If the deployment fails you can view the deployment log,
which is obtained from the device, to diagnose the issue.
You can also see the state of deployments on the Dashboard.
In Devices you can see that
artifact_name has now changed to
This shows your virtual device runs the new rootfs!
For robustness and avoiding unnecessary deployments, Mender will not deploy an Artifact that is already installed on a device. Thus, if you create another deployment with the Artifact you already uploaded, Mender will see that it contains the same rootfs that is already installed and skip the deployment. It will immediately be marked as successful and moved to Past deployments. For this reason, we provide another Artifact that you can use to deploy with at https://d1b0l86ne08fsf.cloudfront.net/1.0.0/vexpress-qemu/vexpress_release_1.mender.
Go to Artifacts again and upload this artifact. You can set
the Description input field to
My original build.
After the Artifact has been uploaded, you can deploy it to your device,
as you did earlier.
Following this, you can deploy the
release-2 Artifact again, and so forth.
As you might have noticed, it is possible to create groups in the Devices tab. Once you have created a group and added one or more devices to it, you can deploy an Artifact to that group by selecting the group instead of All devices when you create a deployment.
This can be very useful in order to deploy to test devices before production, or only deploy to devices owned by a specific customer.
To avoid accidents, Mender only allows a device to be in one group at the time. If a device could be in several groups, for example test and production, unintended deployments and downtime could occur. Therefore, as a safety measure, Mender does not allow this.
Congratulations! You have used the Mender server to deploy your first managed update! If you have a BeagleBone Black, you can proceed to Deploy to physical devices to try out deploying to a real-world device!