When inheriting the
mender-full-ubi class in
Mender provides a default set of features that covers a wide range of boards and
needs. However, sometimes it may be necessary to enable or disable certain
features depending on the needs of the particular build. Use
MENDER_FEATURES_DISABLE variables to enable and
disable features provided by Mender.
To enable a feature, add this to your
MENDER_FEATURES_ENABLE_append = " <FEATURE>"
To disable a feature, add this to your
MENDER_FEATURES_DISABLE_append = " <FEATURE>"
Note that the space inside the string is important in both of the above examples!
Below is a list of the features that Mender provides, with descriptions:
mender-bios - Enables booting of traditional BIOS based systems. Normally
enabled together with
mender-grub. Disabling this feature with
enabled will assume the booting process uses the UEFI standard.
mender-growfs-data - Enable dynamic resizing of the data filesystem through systemd-growfs
mender-grub - Enables integration with the GRUB bootloader.
mender-image - Enables a build that uses the Mender defined partition
mender-image-bios - Enables a build that provides a Mender partitioned image
for use with traditional BIOS based systems (
.biosimg). Enabling this
feature requires enabling
mender-image-sd - Enables a build that provides a Mender partitioned SD card
.sdimg). Enabling this feature requires enabling
mender-image-ubi - Enables a build that provides a Mender partitioned UBI
.ubimg). Enabling this feature requires enabling
mender-image-uefi - Enables a build that provides a Mender partitioned UEFI
.uefiimg). Enabling this feature requires enabling
mender-install - Enables a build that has Mender installed, with
configuration. Note that this does not include the default Mender partition
mender-image for that.
mender-partuuid - Enable usage of UUID as partition identifiers (GRUB only).
You must set the UUID's for all parts in your environment, e.g
# UUID's generated using the 'uuidgen -r' command MENDER_BOOT_PART = "/dev/disk/by-partuuid/9553c78a-bed1-40fe-9333-f7409e0585e5" MENDER_ROOTFS_PART_A = "/dev/disk/by-partuuid/cb8cc332-f5e3-4b53-a489-13d3a8dd5768" MENDER_ROOTFS_PART_B = "/dev/disk/by-partuuid/708798f3-4e9d-4338-bb69-bc92e0b51efb" MENDER_DATA_PART = "/dev/disk/by-partuuid/0965b52a-89bd-46c1-ac69-3b27fb6c2aae"
mender-systemd - Enables a Mender build that uses systemd. See also the
section about disabling Mender as a system
mender-ubi - Enables Mender configuration files specifically for UBI images.
mender-uboot - Enables integration with the U-Boot bootloader.
By default, no features are enabled, but it is common to include a top level
class in order to get some default features. Her is an example of how to enable
such a class in
INHERIT += "mender-full"
The currently available classes are:
mender-full: Enables the most common features for Mender, which are:
mender-full-ubi: Enables the most common features for UBI based Mender
installations, which are:
Yocto releases prior to 2.6 (thud) used a different feature set by default.
Use the following command to inspect features enabled for your build:
bitbake -e core-image-minimal | grep '^DISTRO_FEATURES='
© 2022 Northern.tech AS