Deploy an Operating System update

This tutorial will walk you through how to do robust Operating System updates with rollback. These types of updates cover the whole system including system level applications and the Linux kernel and ensure the device comes back in a consistent state even if the update process is interrupted for any reason such as power loss.

Prerequisites

You should:

• have completed Deploy an application update
• know the IP address of your device

Step 1 - Download the mender-artifact utility on your workstation

Prepare destination directory:

mkdir -p ${HOME}/bin

Download the mender-artifact binary. If you're on Linux

wget https://downloads.mender.io/mender-artifact/3.11.3/linux/mender-artifact -O ${HOME}/bin/mender-artifact

On MacOS

wget https://downloads.mender.io/mender-artifact/3.11.3/darwin/mender-artifact -O ${HOME}/bin/mender-artifact

Make the mender-artifact binary executable:

chmod +x ${HOME}/bin/mender-artifact

Add ${HOME}/bin to PATH:

export PATH="${PATH}:${HOME}/bin"

Step 2 - Setup shell variables on your workstation

Setup the IP_ADDRESS shell variable with correct IP address of your device:

IP_ADDRESS="<DEVICE-IP-ADDRESS>"

Setup USER environment variable to match an existing user on the device, e.g:

USER="<your-user>"

USER="root"

Mender Artifacts require a device compatibility value as input, which must match what the device is reporting to the Mender Server or it will refuse to install it. This is a safety mechanism to avoid installing software to incompatible hardware.

If you are unsure, you can check what the device is reporting on the server:

Use the result from above to assign that value to DEVICE_TYPE shell variable:

DEVICE_TYPE="raspberrypi4"

Set SSH_ARG shell variable to specify the SSH access port:

SSH_ARG="-p 22"

SSH_ARG="-p 8822"

Step 3 - Create a Mender Artifact using the snapshot feature

The easiest way to create Operating System updates is to use the snapshot functionality in Mender, which will create a snapshot of the Operating System on a currently running device and package it as a Mender Artifact that you can deploy to other devices.

Run the following command on your workstation to generate a snapshot Mender Artifact from your device:

mender-artifact write rootfs-image \
    -f ssh://"${USER}@${IP_ADDRESS}" \
    -t "${DEVICE_TYPE}" \
    -n system-v1 \
    -o system-v1.mender \
    -S "${SSH_ARG}"

Depending on your local network and storage speed, this will take up to 10-20 minutes to finish. You will see a progress indicator, and when it reaches 100% it will package the Mender Artifact which will take a few more minutes because it will need to compress the snapshot image.

The end result is a file called system-v1.mender. Upload this file to hosted Mender. You can do that using the UI under the Releases tab, as demonstrated below.

Step 4 - Modify the device software

While your Artifact is uploading, we make some modifications to the device so we can see the effect of the deployment later.

On your device, run the following command to create a file:

echo "hello world" | sudo tee /greetings.txt

If the filesystem is read-only, you can remount it in read-write mode before creating the file:

sudo mount -o remount,rw /

You can now check the /greetings.txt file to verify it exists, as you would expect.

ls -lah /greetings.txt

Note that this modification is not part of your system snapshot created above.

Step 5 - Deploy the snapshot and experiment

Once the Artifact upload in Step 3 has finished, go to the DEPLOYMENTS tab and click CREATE DEPLOYMENT in order to deploy it to your device.

Once this deployment finishes it will have the effect of restoring your full device root filesystem to the same state as when you created the snapshot in Step 3. You can verify this by checking if /greetings.txt eists after the deployment has finished. It is gone! This is because your device filesystem did not have this file at the time you created the snapshot. This works for any change in the filesystem, including removing or installing software and changing any configuration.

Please take a moment to experiment at this stage to familiarize yourself with robust Operating System updates with Mender.

As an example you can iterate this flow:

1. Make a change on the device, e.g change a configuration file or install an application.

2. Create a snapshot of the device changes you made

   Mender will skip a deployment to a device if the Artifact is already installed, in order to limit resource usage, downtime and ensure consistency across the fleet. Make sure to use different names for new Artifacts you generate (instead of the two instances of system-v1 above).

3. Upload the generated Artifact (.mender) to hosted Mender and deploy it.

4. Once you have two or more Artifacts uploaded you can switch between the software you have on your devices by deploying the respective Artifacts.

Deploy to many devices in order to effectively replicate the device software and configuration.

To read more about system snapshots, see the documentation on Artifact from system snapshot.

Using the snapshot feature is one way to create Operating System updates and additional resources on more advanced ways you will find here:

1. Building a Mender Yocto Project image
2. Building a Mender Debian image

Next step

Proceed to Deploy a Docker container update.