Create an Artifact with system snapshot


To support an easy golden image workflow, Mender supports creating a snapshot of the currently running system. In this workflow a "golden image" is maintained on a single device (or SD card) by making run-time modifications on the device, such as installing packages, changing configurations and updating the operating system. When this device has been tested and the environment should be replicated, a snapshot can be taken with Mender. This results in a file system image and Mender Artifact that can be deployed to the rest of the device fleet.

This feature is fully supported by the following filesystems: ext[234], XFS, JFS, btrfs, f2fs, and ReiserFS.

Option 1: Creating a snapshot using mender-artifact directly

There is support for creating a snapshot Artifact directly from a workstation with mender-artifact installed, which is usually the easiest approah. First, make sure your workstation has the latest version of mender-artifact installed.

This approach requires that the golden device is reachable and has ssh and sudo installed. mender-artifact accepts a file URL with ssh schema and will automatically run the commands above on the golden device.

While a snapshot is in progress, all processes that writes to the root filesystem will be blocked for the duration of the snapshot process.

For example, the command:


mender-artifact write rootfs-image -f ssh://${USER}@${ADDR} \
                                   -n artifact-name \
                                   --software-version 1.0 \
                                   -o snapshot-release.1.0.mender \
                                   -t $DEVICE_TYPE

creates an Artifact directly on your workstation, containing the system image of your device.

Please note you can pass extra arguments to ssh. To do this, specify each one of them in a separate -S "${SSH_ARG}" option, e.g.:


mender-artifact write rootfs-image \
    -f ssh://"${USER}@${ADDR}" \
    -n artifact-name \
    --software-version 1.0 \
    -o snapshot-release.1.0.mender \
    -t device-type
    --ssh-args="-p 8122" \
    --ssh-args="-o UserKnownHostsFile=/dev/null" \
    --ssh-args="-o StrictHostKeyChecking=no" \
    --ssh-args="-o PubKeyAuthentication=no"

Option 2: Creating a snapshot on the golden device

With this approach, you can create a snapshot in several steps, working directly in the device terminal. This approach is more suitable if you do not have direct SSH access to the device, the network connectivity is not strong or you would like to customize the workflow more.

The mender executable provides a command mender snapshot dump for dumping a frozen copy of the root filesystem to standard error. In this section, we go through two common approaches for using the snapshot feature from the device: dumping a snapshot to a remote host or to a storage device.

If ssh is available on your device, then it is possible to redirect the output from the snapshot command to a remote host. Assuming a computer is reachable and running the ssh daemon, running the following command will generate a snapshot file root-part.ext4 in the user's home directory on the remote machine:

While a snapshot is in progress, all processes that writes to the root filesystem will be blocked for the duration of the snapshot process. Redirecting the output of the snapshot command to the same filesystem will freeze the system for a short duration before aborting.


mender snapshot dump | ssh $USER@$HOST /bin/sh -c 'cat > $HOME/root-part.ext4`

If ssh is not available, you can attach a removable storage device (e.g. USB stick) and redirect the output to a file on the device.

mount /dev/(...) /mnt
mender snapshot dump > /mnt/root-part.ext4

Make sure there is enough available space on the storage device for the entire root filesystem (e.g. comparing the output of df -h / /mnt).

To help save storage space and bandwidth, a built-in --compression option is available. For the example above, a gzip-compressed version of the filesystem is produced by passing gzip to the --compression flag.

mount /dev/(...) /mnt
mender snapshot dump --compression gzip > /mnt/root-part.ext4.gz

Don't forget the .gz extension in the target filename.

In this case, passing root-part.ext4 (or root-part.ext4.gz) as the file-parameter to mender-artifact produces a deployment ready Mender Artifact:

mender-artifact write rootfs-image -f /mnt/root-part.ext4 \
                                   -n artifact-name \
                                   --software-version 1.0 \
                                   -o snapshot-release.1.0.mender \
                                   -t device-type

Uploading this artifact to the mender server and creating a deployment ensures that all devices runs an identical rootfs version as the golden device.

We welcome contributions to improve this documentation. To submit a change, use the Edit link at the top of the page or email us at .