mender-convert

Release information Release notes & changelog mender-convert

mender-convert 4.2.2

Released 06.12.2024

Changelogs

mender-convert (4.2.2)

New changes in mender-convert since 4.2.1:

Bug Fixes

Make sure that /data mountpoint exists when using a R/O rootfs. (MEN-7219)
Fix installation of Mender client v4 when the user specifies the exact version to use with MENDER_CLIENT_VERSION=a.b.c. Using auto (default) or latest does not trigger this bug. (MEN-7325)

mender-convert 4.2.1

Released 05.16.2024

Changelogs

mender-convert (4.2.1)

New changes in mender-convert since 4.2.0:

Bug Fixes

Fix occasional failure when handling service files. (MEN-7143)
Fix boot problems on RaspiOS images. (MEN-7143)
Make sure rootfs-image updates also updates the kernel.
Fix boot failure on Ubuntu image for Raspberry Pi.
Missing DTB inclusion in armbian-based images
Remove incorrect warning about 64bit ext4 flag. (MEN-6027)

mender-convert 4.2.0

Released 03.21.2024

Changelogs

mender-convert (4.2.0)

New changes in mender-convert since 4.1.1:

Bug Fixes

Remove unneeded mender_grub_storage_device assignment which could boot from the wrong device if a USB stick was inserted.

Features

From Mender client v4 onwards, the client is distributed in two separate packages: mender-auth and mender-update. Now mender-convert installs these two when installing the client. (MEN-6282)
Install mender-flash when installing the Mender client (MEN-6282)
Switch to install packages using Debian package manager. This means that the files are no longer simply extracted into place, which has been a big source of conflict with the package manager when doing later upgrades. It also means that a default mender.conf file will be provided if mender-setup is installed, since it installs it by default. (MEN-6935)
Install mender-setup and mender-snapshot by default when Mender client 4.0 or later is selected. Previously they were built-in, but are now optional and can be turned off with:
```
MENDER_SETUP_INSTALL=n
MENDER_SNAPSHOT_INSTALL=n
```
to save space. (MEN-6935)
add support for MENDER_CLIENT_VERSION="auto", which installs the Mender Client 3.x series for Debian bullseye and buster and for Ubuntu jammy and focal, the Mender Client 4.x series for all the other distributions (MEN-6976)

Other

The mender-client-data-dir.service has been renamed to mender-data-dir.service. This is used as a dependency for the mender update client, and most users should not notice the change.
Update the rpi bullseye image to the 2023-05-03 release.

mender-convert 4.1.1

Released 01.15.2024

Statistics

A total of 4 lines added, 3 removed (delta 1)

Developers with the most changesets
Lluis Campos	2 (100.0%)

Developers with the most changed lines
Lluis Campos	4 (100.0%)

Top changeset contributors by employer
Northern.tech	2 (100.0%)

Top lines changed by employer
Northern.tech	4 (100.0%)

Employers with the most hackers (total 1)
Northern.tech	1 (100.0%)

Changelogs

mender-convert (4.1.1)

New changes in mender-convert since 4.1.0:

Set default MENDER_CLIENT_VERSION to 3.5.2. mender-convert is not yet integrated with upcoming client v4. (MEN-6948)

mender-convert 4.1.0

Released 12.28.2023

Statistics

Developers with the most changesets
Lluis Campos	5 (29.4%)
Kristian Amlie	5 (29.4%)
Michael Mugnai	2 (11.8%)
Julien Roland	1 (5.9%)
Lorenzo Ruffati	1 (5.9%)
Josef Holzmayr	1 (5.9%)
Tom Callahan	1 (5.9%)
Krzysztof Jaskiewicz	1 (5.9%)

Developers with the most changed lines
Kristian Amlie	106 (45.9%)
Lluis Campos	76 (32.9%)
Michael Mugnai	33 (14.3%)
Lorenzo Ruffati	5 (2.2%)
Josef Holzmayr	5 (2.2%)
Julien Roland	2 (0.9%)
Tom Callahan	2 (0.9%)
Krzysztof Jaskiewicz	2 (0.9%)

Top changeset contributors by employer
Northern.tech	12 (70.6%)
michael.mugnai@gmail.com	2 (11.8%)
Unikie oy	1 (5.9%)
juroland@gmail.com	1 (5.9%)
78968887+tcallahan14@users.noreply.github.com	1 (5.9%)

Top lines changed by employer
Northern.tech	189 (81.8%)
michael.mugnai@gmail.com	33 (14.3%)
Unikie oy	5 (2.2%)
juroland@gmail.com	2 (0.9%)
78968887+tcallahan14@users.noreply.github.com	2 (0.9%)

Employers with the most hackers (total 8)
Northern.tech	4 (50.0%)
michael.mugnai@gmail.com	1 (12.5%)
Unikie oy	1 (12.5%)
juroland@gmail.com	1 (12.5%)
78968887+tcallahan14@users.noreply.github.com	1 (12.5%)

Changelogs

mender-convert (4.1.0)

New changes in mender-convert since 4.0.3:

Bug Fixes

hosted bootstrap script syntax error

Features

add support for BTRFS filesystems

mender-convert 4.0.3

Released 10.18.2023

Statistics

Developers with the most changesets
Kristian Amlie	1 (33.3%)
Michael Mugnai	1 (33.3%)
Lorenzo Ruffati	1 (33.3%)

Developers with the most changed lines
Michael Mugnai	19 (76.0%)
Lorenzo Ruffati	5 (20.0%)
Kristian Amlie	1 (4.0%)

Top changeset contributors by employer
Northern.tech	1 (33.3%)
michael.mugnai@gmail.com	1 (33.3%)
Unikie Oy	1 (33.3%)

Top lines changed by employer
michael.mugnai@gmail.com	19 (76.0%)
Unikie Oy	5 (20.0%)
Northern.tech	1 (4.0%)

Employers with the most hackers (total 3)
michael.mugnai@gmail.com	1 (33.3%)
Unikie Oy	1 (33.3%)
Northern.tech	1 (33.3%)

Changelogs

mender-convert (4.0.3)

New changes in mender-convert since 4.0.2:

Bug Fixes

Reorder operation to move data directory before rootfs size is estimated
fix: hosted bootstrap support for 'eu' region

mender-convert 4.0.2

Released 08.25.2023

Statistics

A total of 13 lines added, 36 removed (delta -23)

Developers with the most changesets
Kristian Amlie	2 (66.7%)
Tom Callahan	1 (33.3%)

Developers with the most changed lines
Kristian Amlie	37 (94.9%)
Tom Callahan	2 (5.1%)

Developers with the most lines removed
Kristian Amlie	23 (63.9%)

Top changeset contributors by employer
Northern.tech	2 (66.7%)
78968887+tcallahan14@users.noreply.github.com	1 (33.3%)

Top lines changed by employer
Northern.tech	37 (94.9%)
78968887+tcallahan14@users.noreply.github.com	2 (5.1%)

Employers with the most hackers (total 2)
Northern.tech	1 (50.0%)
78968887+tcallahan14@users.noreply.github.com	1 (50.0%)

Changelogs

mender-convert (4.0.2)

New changes in mender-convert since 4.0.1:

Bug Fixes

Remove trailing forward slash in overlay path.

This prevented the overlay from being applied, due to duplicate slashes in the rsync command (mender-convert-modify line 280). The end result was that the /etc/mender/mender.conf file was missing from the final image. Removing the extra forward slash solved the problem.
Fix convert error when using MENDER_GRUB_D_INTEGRATION and MENDER_ENABLE_PARTUUID together. (MEN-6645)

Other

Drop support for Debian 9 (stretch).

mender-convert 4.0.1

Released 03.08.2023

Statistics

A total of 1 lines added, 1 removed (delta 0)

Developers with the most changesets
Kristian Amlie	1 (100.0%)

Developers with the most changed lines
Kristian Amlie	1 (100.0%)

Top changeset contributors by employer
Northern.tech	1 (100.0%)

Top lines changed by employer
Northern.tech	1 (100.0%)

Employers with the most hackers (total 1)
Northern.tech	1 (100.0%)

Changelogs

mender-convert (4.0.1)

New changes in mender-convert since 4.0.0:

Bug Fixes

grub-mender-grubenv: Fix boot failure because mender_grub_storage_device is not exported correctly.

mender-convert 4.0.0

Released 02.20.2023

Statistics

A total of 888 lines added, 770 removed (delta 118)

Developers with the most changesets
Lluis Campos	15 (30.0%)
Kristian Amlie	14 (28.0%)
Ole Petter Orhagen	8 (16.0%)
Dell Green	3 (6.0%)
Mikael Torp-Holte	3 (6.0%)
Fabio Tranchitella	3 (6.0%)
Manuel Zedel	2 (4.0%)
Sven Bachmann	1 (2.0%)
Alin Alexandru	1 (2.0%)

Developers with the most changed lines
Manuel Zedel	387 (36.2%)
Ole Petter Orhagen	295 (27.6%)
Kristian Amlie	194 (18.1%)
Lluis Campos	115 (10.8%)
Mikael Torp-Holte	49 (4.6%)
Fabio Tranchitella	13 (1.2%)
Dell Green	8 (0.7%)
Sven Bachmann	5 (0.5%)
Alin Alexandru	3 (0.3%)

Developers with the most lines removed
Manuel Zedel	145 (18.8%)
Mikael Torp-Holte	19 (2.5%)

Developers with the most signoffs (total 1)
Kristian Amlie	1 (100.0%)

Top changeset contributors by employer
Northern.tech	45 (90.0%)
Ideaworks Ltd	3 (6.0%)
INNOBYTE	1 (2.0%)
dev@mcbachmann.de	1 (2.0%)

Top lines changed by employer
Northern.tech	1053 (98.5%)
Ideaworks Ltd	8 (0.7%)
dev@mcbachmann.de	5 (0.5%)
INNOBYTE	3 (0.3%)

Employers with the most signoffs (total 1)
Northern.tech	1 (100.0%)

Employers with the most hackers (total 9)
Northern.tech	6 (66.7%)
Ideaworks Ltd	1 (11.1%)
dev@mcbachmann.de	1 (11.1%)
INNOBYTE	1 (11.1%)

Changelogs

mender-convert (4.0.0)

New changes in mender-convert since 3.0.1:

Bug Fixes

The prebuilt Mender Grub integration now comes with the XFS module installed by default. (ME-6)
Support Mender integration in raspberrypi-sys-mods/firstboot script included in recent Raspberry Pi OS images by modifying the hard-coded mount point for the boot partition from /boot to /uboot. (MEN-5944)
Support Mender integration in userconf-pi/userconf-service script included in recent Raspberry Pi OS images by modifying the hard-coded mount point for the boot partition from /boot to /uboot. (MEN-5954)
Support Mender integration in raspberrypi-net-mods/wpa_copy script included in recent Raspberry Pi OS images by modifying the hard-coded mount point for the boot partition from /boot to /uboot. (MEN-5955)
Supplying configs/mender_convert_demo_config as a --config parameter to mender-convert will add/override polling interval parameters on top of a mender.conf file found in the overlays. (MEN-5109)
User must now supply the overlay generated by a bootstrap script to mender-convert with the --overlay option in order for the scripts to take effect. Additionally, the bootstrap scripts may now be called from any directory. (MEN-5109)
Fix grub.d integration when host and target 32/64 bit architectures don't match. Namely: pass the correct --target parameter to grub-install command instead of relaying on host architecture. (MEN-5979)
grub-mender-grubenv: Add lock file to prevent data races when accessing boot environment concurrently.
grub-mender-grubenv: Fail execution if both environments are corrupt.
grub-mender-grubenv: Recompute checksum after restoring environment (new versions of grub-editenv add extra data).
Project can now be used as a git submodule again Ticket: # (MEN-6305)
Added support for installing mender client for ubuntu jammy conversions Ticket: # (MEN-6306)
support added for mender-client deb package data archive compressed with zstd (MEN-6307)

Features

A bootstrap Artifact is now installed in /data/mender/bootstrap.mender, on every conversion, adding the ability to have the Mender client bootstrap the database without running an update first, thus enabling delta-updates to be installed without first running a full rootfs update. Please note that this will require a minimum of the Mender client at version 3.4.x. However, the generated Artifact is still usable in any case. (MEN-5594)
use a Docker volume as work area (MEN-5943)

mender-convert 3.0.2

Released 03.10.2023

Statistics

A total of 115 lines added, 26 removed (delta 89)

Developers with the most changesets
Lluis Campos	8 (53.3%)
Kristian Amlie	4 (26.7%)
Dell Green	3 (20.0%)

Developers with the most changed lines
Lluis Campos	68 (59.1%)
Kristian Amlie	39 (33.9%)
Dell Green	8 (7.0%)

Developers with the most signoffs (total 1)
Kristian Amlie	1 (100.0%)

Top changeset contributors by employer
Northern.tech	12 (80.0%)
Ideaworks Ltd	3 (20.0%)

Top lines changed by employer
Northern.tech	107 (93.0%)
Ideaworks Ltd	8 (7.0%)

Employers with the most signoffs (total 1)
Northern.tech	1 (100.0%)

Employers with the most hackers (total 3)
Northern.tech	2 (66.7%)
Ideaworks Ltd	1 (33.3%)

Changelogs

mender-convert (3.0.2)

New changes in mender-convert since 3.0.1:

Bug Fixes

Support Mender integration in raspberrypi-sys-mods/firstboot script included in recent Raspberry Pi OS images by modifying the hard-coded mount point for the boot partition from /boot to /uboot. (MEN-5944)
Support Mender integration in userconf-pi/userconf-service script included in recent Raspberry Pi OS images by modifying the hard-coded mount point for the boot partition from /boot to /uboot. (MEN-5954)
Support Mender integration in raspberrypi-net-mods/wpa_copy script included in recent Raspberry Pi OS images by modifying the hard-coded mount point for the boot partition from /boot to /uboot. (MEN-5955)
Fix grub.d integration when host and target 32/64 bit architectures don't match. Namely: pass the correct --target parameter to grub-install command instead of relaying on host architecture. (MEN-5979)
grub-mender-grubenv: Add lock file to prevent data races when accessing boot environment concurrently.
grub-mender-grubenv: Fail execution if both environments are corrupt.
grub-mender-grubenv: Recompute checksum after restoring environment (new versions of grub-editenv add extra data).
Add the XFS module to the grub efi binary module list
Project can now be used as a git submodule again Ticket: # (MEN-6305)
Added support for installing mender client for ubuntu jammy conversions Ticket: # (MEN-6306)
support added for mender-client deb package data archive compressed with zstd (MEN-6307)
grub-mender-grubenv: Fix boot failure because mender_grub_storage_device is not exported correctly.

mender-convert 3.0.1

Released 09.25.2022

Statistics

A total of 269 lines added, 203 removed (delta 66)

Developers with the most changesets
Lluis Campos	2 (33.3%)
Kristian Amlie	2 (33.3%)
Alin Alexandru	1 (16.7%)
Ole Petter Orhagen	1 (16.7%)

Developers with the most changed lines
Ole Petter Orhagen	220 (81.8%)
Lluis Campos	33 (12.3%)
Kristian Amlie	13 (4.8%)
Alin Alexandru	3 (1.1%)

Top changeset contributors by employer
Northern.tech	5 (83.3%)
INNOBYTE	1 (16.7%)

Top lines changed by employer
Northern.tech	266 (98.9%)
INNOBYTE	3 (1.1%)

Employers with the most hackers (total 4)
Northern.tech	3 (75.0%)
INNOBYTE	1 (25.0%)

Changelogs

mender-convert (3.0.1)

New changes in mender-convert since 3.0.0:

Bug Fixes

Detect when EFI is not available and disable grub.d integration.
Amend error message for optional parameters

mender-convert 3.0.0

Released 06.14.2022

Statistics

A total of 1475 lines added, 474 removed (delta 1001)

Developers with the most changesets
Kristian Amlie	21 (39.6%)
Ole Petter Orhagen	16 (30.2%)
Lluis Campos	8 (15.1%)
Josef Holzmayr	4 (7.5%)
Simon Ensslen	2 (3.8%)
Mikael Torp-Holte	1 (1.9%)
Peter Grzybowski	1 (1.9%)

Developers with the most changed lines
Kristian Amlie	690 (44.9%)
Ole Petter Orhagen	479 (31.2%)
Lluis Campos	173 (11.3%)
Simon Ensslen	123 (8.0%)
Josef Holzmayr	46 (3.0%)
Peter Grzybowski	23 (1.5%)
Mikael Torp-Holte	2 (0.1%)

Top changeset contributors by employer
Northern.tech	51 (96.2%)
Griesser AG	2 (3.8%)

Top lines changed by employer
Northern.tech	1413 (92.0%)
Griesser AG	123 (8.0%)

Employers with the most hackers (total 7)
Northern.tech	6 (85.7%)
Griesser AG	1 (14.3%)

Changelogs

mender-convert (3.0.0)

New changes in mender-convert since 2.6.2:

Modify ln calls for data store links to support successive runs (MEN-5078)
Fix "unbound variable" error when using raspberrypi4_ubuntu_config.
Download and install Debian packages taking into account the target OS. Now downloads.mender.io serves four distributions: the two latests releases for Debian and Ubuntu. Probe /etc/os-release to figure out the correct package to install, and fallback to Debian Buster packages which was the previous default. (MEN-5410)
Fix installation of user specified versions for mender-configure add-on
Debian 11 tests support. (MEN-5257)
The fstab file from the image being converted is now preserved across convertions, with the Mender specific additions merged with the existing fstab file, as opposed to replacing it completely. Which was the previous approach.
fix compatibility of docker-mender-convert with macOS/*BSD
Keep the UUID of the original first partition on the boot partition of the converted image when the partition table is GPT. (MEN-5221)
clarify supported development platforms
clarify Raspbian compatibility
README: add compatibility tables for configurations
The mender-convert docker image does now contain the mender-convert application and does no longer need companion checkouts.
All input files passed to docker-mender-convert must be located within the input directory as opposed to anywhere in the mender-convert checkout directory
If grub*.efi preexists on the EFI partition, keep it instead of installing our own. In all other cases, we fall back to the old functionality of installing mender-grub and nuking the existing bootloader.
Integrate with grub.d framework.

This means that grub-install and update-grub no longer risk bricking the device, but will produce boot scripts with Mender support integrated. It also means that the standard GRUB menu will be available.

It is supported on x86_64 platforms where grub.d is available, and can be turned on and off with MENDER_GRUB_D_INTEGRATION. The default is to use it if available.

Devices that did not previously use grub.d integration won't be upgraded correctly with it turned on, so it is advised to set MENDER_GRUB_D_INTEGRATION=n if you are upgrading existing devices. (MEN-5219)

Dependabot bumps

Aggregated Dependabot Changelogs:

Bumps jsdom from 17.0.0 to 18.0.0.

updated-dependencies:
- dependency-name: jsdom
dependency-type: direct:production
update-type: version-update:semver-major

Bumps jsdom from 18.0.0 to 18.0.1.

updated-dependencies:
- dependency-name: jsdom
dependency-type: direct:production
update-type: version-update:semver-patch

Bumps jsdom from 18.0.1 to 18.1.0.

updated-dependencies:
- dependency-name: jsdom
dependency-type: direct:production
update-type: version-update:semver-minor

Bumps jsdom from 18.1.0 to 18.1.1.

updated-dependencies:
- dependency-name: jsdom
dependency-type: direct:production
update-type: version-update:semver-patch

Bumps jsdom from 18.1.1 to 19.0.0.

updated-dependencies:
- dependency-name: jsdom
dependency-type: direct:production
update-type: version-update:semver-major

mender-convert 2.6.2

Released 02.02.2022

Statistics

A total of 136 lines added, 70 removed (delta 66)

Developers with the most changesets
Lluis Campos	5 (100.0%)

Developers with the most changed lines
Lluis Campos	143 (100.0%)

Top changeset contributors by employer
Northern.tech	5 (100.0%)

Top lines changed by employer
Northern.tech	143 (100.0%)

Employers with the most hackers (total 1)
Northern.tech	1 (100.0%)

Changelogs

mender-convert (2.6.2)

New changes in mender-convert since 2.6.1:

Download and install Debian packages taking into account the target OS. Now downloads.mender.io serves four distributions: the two latests releases for Debian and Ubuntu. Probe /etc/os-release to figure out the correct package to install, and fallback to Debian Buster packages which was the previous default. (MEN-5410)
Fix installation of user specified versions for mender-configure add-on

mender-convert 2.6.1

Released 01.24.2022

Statistics

A total of 12 lines added, 13 removed (delta -1)

Developers with the most changesets
Ole Petter Orhagen	4 (66.7%)
Kristian Amlie	1 (16.7%)
Lluis Campos	1 (16.7%)

Developers with the most changed lines
Ole Petter Orhagen	6 (40.0%)
Lluis Campos	5 (33.3%)
Kristian Amlie	4 (26.7%)

Developers with the most lines removed
Kristian Amlie	3 (23.1%)

Top changeset contributors by employer
Northern.tech	6 (100.0%)

Top lines changed by employer
Northern.tech	15 (100.0%)

Employers with the most hackers (total 3)
Northern.tech	3 (100.0%)

Changelogs

mender-convert (2.6.1)

New changes in mender-convert since 2.6.0:

Modify ln calls for data store links to support successive runs (MEN-5078)
Fix "unbound variable" error when using raspberrypi4_ubuntu_config.

mender-convert 2.6.0

Released 09.28.2021

Statistics

A total of 194 lines added, 88 removed (delta 106)

Developers with the most changesets
Kristian Amlie	7 (36.8%)
Lluis Campos	6 (31.6%)
Ole Petter Orhagen	5 (26.3%)
Andrey Basov	1 (5.3%)

Developers with the most changed lines
Kristian Amlie	91 (45.7%)
Lluis Campos	79 (39.7%)
Ole Petter Orhagen	25 (12.6%)
Andrey Basov	4 (2.0%)

Developers with the most signoffs (total 1)
Kristian Amlie	1 (100.0%)

Top changeset contributors by employer
Northern.tech	18 (94.7%)
dev.basov@gmail.com	1 (5.3%)

Top lines changed by employer
Northern.tech	195 (98.0%)
dev.basov@gmail.com	4 (2.0%)

Employers with the most signoffs (total 1)
Northern.tech	1 (100.0%)

Employers with the most hackers (total 4)
Northern.tech	3 (75.0%)
dev.basov@gmail.com	1 (25.0%)

Changelogs

mender-convert (2.6.0)

New changes in mender-convert since 2.5.0:

configs/images/raspberrypi_raspbian_config: Allow APT Suite change (MEN-5057)
Fix broken download of packages when *_VERSION are set to master.
grub-mender-grubenv: User space tools, "fw_printenv" and "fw_setenv" have been renamed to "grub-mender-grubenv-print" and "grub-mender-grubenv-set", respectively. This has been done in order to avoid conflict with U-Boot's user space tools, which have the same names.
RPi pre-converted images: remove Mender client version from Artifact name.
Create symlink from /var/lib/mender-monitor to /data/mender-configure (MEN-5086)
Closing curly brace added in bootstrap-rootfs-overlay-production-server.sh
Aggregated Dependabot Changelogs:
- Bumps jsdom from 16.6.0 to 16.7.0.
- Release notes
- Changelog
- Commits
  
  updated-dependencies:
- dependency-name: jsdom dependency-type: direct:production update-type: version-update:semver-minor ...
- Bumps jsdom from 16.7.0 to 17.0.0.
- Release notes
- Changelog
- Commits
  
  updated-dependencies:
- dependency-name: jsdom dependency-type: direct:production update-type: version-update:semver-major ...

mender-convert 2.5.3

Released 02.09.2022

Statistics

A total of 143 lines added, 78 removed (delta 65)

Developers with the most changesets
Lluis Campos	6 (75.0%)
Ole Petter Orhagen	1 (12.5%)
Kristian Amlie	1 (12.5%)

Developers with the most changed lines
Lluis Campos	147 (96.1%)
Kristian Amlie	4 (2.6%)
Ole Petter Orhagen	2 (1.3%)

Developers with the most lines removed
Kristian Amlie	3 (3.8%)

Top changeset contributors by employer
Northern.tech	8 (100.0%)

Top lines changed by employer
Northern.tech	153 (100.0%)

Employers with the most signoffs (total 0)

Employers with the most hackers (total 3)
Northern.tech	3 (100.0%)

Changelogs

mender-convert (2.5.3)

New changes in mender-convert since 2.5.2:

Modify ln calls for data store links to support successive runs (MEN-5078)
Fix "unbound variable" error when using raspberrypi4_ubuntu_config.
Download and install Debian packages taking into account the target OS. Now downloads.mender.io serves four distributions: the two latests releases for Debian and Ubuntu. Probe /etc/os-release to figure out the correct package to install, and fallback to Debian Buster packages which was the previous default. (MEN-5410)
Fix installation of user specified versions for mender-configure add-on

mender-convert 2.5.2

Released 09.30.2021

Statistics

A total of 107 lines added, 38 removed (delta 69)

Developers with the most changesets
Kristian Amlie	5 (71.4%)
Lluis Campos	1 (14.3%)
Andrey Basov	1 (14.3%)

Developers with the most changed lines
Kristian Amlie	89 (83.2%)
Lluis Campos	14 (13.1%)
Andrey Basov	4 (3.7%)

Developers with the most signoffs (total 1)
Kristian Amlie	1 (100.0%)

Top changeset contributors by employer
Northern.tech	6 (85.7%)
dev.basov@gmail.com	1 (14.3%)

Top lines changed by employer
Northern.tech	103 (96.3%)
dev.basov@gmail.com	4 (3.7%)

Employers with the most signoffs (total 1)
Northern.tech	1 (100.0%)

Employers with the most hackers (total 3)
Northern.tech	2 (66.7%)
dev.basov@gmail.com	1 (33.3%)

Changelogs

mender-convert 2.5.2

mender-convert (2.5.2)

New changes in mender-convert since 2.5.0:

Closing curly brace added in bootstrap-rootfs-overlay-production-server.sh
Fix broken download of packages when *_VERSION are set to master.

mender-convert 2.5.1

Released 09.30.2021

mender-convert 2.5.1 was a faulty release, and has been removed.

mender-convert 2.5.0

Released 07.14.2021

Statistics

A total of 167 lines added, 219 removed (delta -52)

Developers with the most changesets
Lluis Campos	9 (37.5%)
Ole Petter Orhagen	9 (37.5%)
Kristian Amlie	4 (16.7%)
Fabio Tranchitella	2 (8.3%)

Developers with the most changed lines
Ole Petter Orhagen	154 (51.9%)
Lluis Campos	81 (27.3%)
Kristian Amlie	50 (16.8%)
Fabio Tranchitella	12 (4.0%)

Developers with the most lines removed
Kristian Amlie	38 (17.4%)
Ole Petter Orhagen	13 (5.9%)
Lluis Campos	12 (5.5%)

Developers with the most signoffs (total 2)
Lluis Campos	2 (100.0%)

Top changeset contributors by employer
Northern.tech	24 (100.0%)

Top lines changed by employer
Northern.tech	297 (100.0%)

Employers with the most signoffs (total 2)
Northern.tech	2 (100.0%)

Employers with the most hackers (total 4)
Northern.tech	4 (100.0%)

Changelogs

mender-convert (2.5.0)

New changes in mender-convert since 2.4.0:

Switch to stable version of mender-configure.
Always create symlinks from /var/lib/mender-configure to /data/mender-configure. They always need to installed in a rootfs-image prepared image, even if the software isn't, because if the package is installed later, the links must be present or it will act as if it is a non-rootfs image, and store the settings on the rootfs partition, when they should be stored on the data partition.
Raspberry Pi: create symbolic links from /boot to /uboot for all existing files in boot partition. Some Raspberry Pi apps, like Pi Camera, expect firmware files at /boot. (MEN-4658)
Added an option MENDER_CLIENT_INSTALL=y/n, in order to configure the installation of the Mender client into the converted image. Defaults to yes. (MEN-4256)
Add a demo configuration in configs/mender_convert_demo_config which when added at run time creates a Mender demo setup in the converted image. This includes short polling intervals, and all add-on's installed by default. (MEN-4462)
Aggregated Dependabot Changelogs:
- Bumps jsdom from 16.4.0 to 16.5.3.
- Release notes
- Changelog
- Commits
- Bumps jsdom from 16.5.3 to 16.6.0.
- Release notes
- Changelog
- Commits

mender-convert 2.4.0

Released 04.19.2021

Statistics

A total of 3340 lines added, 1222 removed (delta 2118)

Developers with the most changesets
Ole Petter Orhagen	19 (50.0%)
Lluis Campos	9 (23.7%)
Kristian Amlie	8 (21.1%)
Fabio Tranchitella	2 (5.3%)

Developers with the most changed lines
Ole Petter Orhagen	3240 (95.5%)
Lluis Campos	84 (2.5%)
Kristian Amlie	58 (1.7%)
Fabio Tranchitella	12 (0.4%)

Developers with the most lines removed
Kristian Amlie	38 (3.1%)

Developers with the most signoffs (total 1)
Lluis Campos	1 (100.0%)

Top changeset contributors by employer
Northern.tech	38 (100.0%)

Top lines changed by employer
Northern.tech	3394 (100.0%)

Employers with the most signoffs (total 1)
Northern.tech	1 (100.0%)

Employers with the most hackers (total 4)
Northern.tech	4 (100.0%)

Changelogs

mender-convert (2.4.0)

New changes in mender-convert since 2.3.0:

Set mender-connect version to latest (MEN-4200)
Support installing mender-configure addon. Not installed by default, it can be configured using MENDER_ADDON_CONFIGURE_INSTALL and MENDER_ADDON_CONFIGURE_VERSION variables. (MEN-4422)
Set mender-configure version to master (MEN-4422)
The standard RasperryPi configuration now comes with UBoot 2020.01 as the default. (MEN-4395)
raspberrypi_config: Modify headless configuration services to expect boot partition in /uboot instead of /boot. (MEN-4117)
[raspberrypi_config] Enable UART in U-Boot config.txt (MEN-4567)
Update mender-artifact to 3.5.x.
Switch to stable version of mender-configure.
Always create symlinks from /var/lib/mender-configure to /data/mender-configure. They always need to installed in a rootfs-image prepared image, even if the software isn't, because if the package is installed later, the links must be present or it will act as if it is a non-rootfs image, and store the settings on the rootfs partition, when they should be stored on the data partition.

mender-convert 2.3.1

Released 16.04.2021

Statistics

Developers with the most changesets
Ole Petter Orhagen	4 (80.0%)
Lluis Campos	1 (20.0%)

Developers with the most changed lines
Lluis Campos	9 (64.3%)
Ole Petter Orhagen	5 (35.7%)

Top changeset contributors by employer
Northern.tech	5 (100.0%)

Top lines changed by employer
Northern.tech	14 (100.0%)

Employers with the most hackers (total 2)
Northern.tech	2 (100.0%)

Changelogs

mender-convert (2.3.1)

New changes in mender-convert since 2.3.0:

The standard RasperryPi configuration now comes with UBoot 2020.01 as the default. (MEN-4395)
[raspberrypi_config] Enable UART in U-Boot config.txt (MEN-4567)

mender-convert 2.3.0

Released 01.20.2021

Statistics

A total of 858 lines added, 378 removed (delta 480)

Developers with the most changesets
Lluis Campos	31 (53.4%)
Kristian Amlie	9 (15.5%)
Drew Moseley	7 (12.1%)
Ole Petter Orhagen	6 (10.3%)
Nils Olav Kvelvane Johansen	2 (3.4%)
Fabio Tranchitella	1 (1.7%)
Mirza Krak	1 (1.7%)
Alin Alexandru	1 (1.7%)

Developers with the most changed lines
Lluis Campos	642 (71.0%)
Kristian Amlie	125 (13.8%)
Drew Moseley	51 (5.6%)
Ole Petter Orhagen	36 (4.0%)
Nils Olav Kvelvane Johansen	22 (2.4%)
Fabio Tranchitella	16 (1.8%)
Alin Alexandru	11 (1.2%)
Mirza Krak	1 (0.1%)

Developers with the most lines removed
Mirza Krak	1 (0.3%)

Developers with the most signoffs (total 1)
Lluis Campos	1 (100.0%)

Top changeset contributors by employer
Northern.tech	57 (98.3%)
INNOBYTE	1 (1.7%)

Top lines changed by employer
Northern.tech	893 (98.8%)
INNOBYTE	11 (1.2%)

Employers with the most signoffs (total 1)
Northern.tech	1 (100.0%)

Employers with the most hackers (total 8)
Northern.tech	7 (87.5%)
INNOBYTE	1 (12.5%)

Changelogs

mender-convert (2.3.0)

New changes in mender-convert since 2.2.0:

Fix inadvertent fstab change of fstype field.
package: Create partitions as ext4.
grub-efi: Fix inability to upgrade to a different kernel.
Fix massive root filesystem corruption under some build conditions.
Add support for overlay hooks
beaglebone: Implement workaround for broken U-Boot and kernel. (MEN-3952)
beaglebone: Remove U-Boot integration, which has not worked for a long time. U-Boot will still be used for booting, but GRUB will be used for integration with Mender, by chainloading via UEFI. (MEN-3952)
Support overriding default image compression
Do not compress output image for uncompressed input image
Package latest released Mender-client by default (QA-214)
Use separate chown and chgrp commands when creating rootfs overlay.
Support installing mender-shell addon. Not installed by default, it can be configured using MENDER_ADDON_SHELL_INSTALL and MENDER_ADDON_SHELL_VERSION variables. (MEN-4097)
Set mender-shell version to master (MEN-4097)
Create demo configuration for Mender Shell addon in bootstrap-rootfs-overlay-demo-server.sh script (MEN-4097)
Better parameter checks for read-only options.
Use unique work directories when building with docker.
Fix error when removing empty directories in rootfs/boot
Use numeric uid and gid for better cross-compatibility.
Now it is possible to write multiple device types in the config file using a space seperated string. Filenames for files in the deploy dir will contain all the device names seperated with +. (MEN-3361)
Now it is possible to to select a custom filename for the deployed files by using a DEPLOY_IMAGE_NAME string in the config file.
Set mender-connect version to latest (MEN-4200)
Aggregated Dependabot Changelogs:
Bumps tests/mender-image-tests from 986bd6e to 5f88854.
Release notes
Commits
Bump tests/mender-image-tests from 986bd6e to 5f88854
Bumps tests/mender-image-tests from 5f88854 to 55c846d.
Release notes
Commits
Bumps tests/mender-image-tests from 55c846d to cab12eb.
Release notes
Commits
Bump tests/mender-image-tests from 55c846d to cab12eb

mender-convert 2.2.2

Released 01.21.2021

Statistics

A total of 73 lines added, 40 removed (delta 33)

Developers with the most changesets
Lluis Campos	4 (28.6%)
Ole Petter Orhagen	4 (28.6%)
Kristian Amlie	3 (21.4%)
Drew Moseley	2 (14.3%)
Mirza Krak	1 (7.1%)

Developers with the most changed lines
Lluis Campos	37 (49.3%)
Drew Moseley	20 (26.7%)
Ole Petter Orhagen	11 (14.7%)
Kristian Amlie	6 (8.0%)
Mirza Krak	1 (1.3%)

Developers with the most lines removed
Mirza Krak	1 (2.5%)

Top changeset contributors by employer
Northern.tech	14 (100.0%)

Top lines changed by employer
Northern.tech	75 (100.0%)

Employers with the most hackers (total 5)
Northern.tech	5 (100.0%)

Changelogs

mender-convert (2.2.2)

New changes in mender-convert since 2.2.1:

Package latest released Mender-client by default (QA-214)
Use separate chown and chgrp commands when creating rootfs overlay.
Better parameter checks for read-only options.
Fix error when removing empty directories in rootfs/boot

mender-convert 2.2.1

Released 11.05.2020

Statistics

A total of 144 lines added, 96 removed (delta 48)

Developers with the most changesets
Kristian Amlie	6 (60.0%)
Ole Petter Orhagen	2 (20.0%)
Lluis Campos	2 (20.0%)

Developers with the most changed lines
Kristian Amlie	119 (81.0%)
Lluis Campos	23 (15.6%)
Ole Petter Orhagen	5 (3.4%)

Developers with the most lines removed
Ole Petter Orhagen	3 (3.1%)

Top changeset contributors by employer
Northern.tech	10 (100.0%)

Top lines changed by employer
Northern.tech	147 (100.0%)

Employers with the most hackers (total 3)
Northern.tech	3 (100.0%)

Changelogs

mender-convert (2.2.1)

New changes in mender-convert since 2.2.0:

grub-efi: Fix inability to upgrade to a different kernel.
Fix massive root filesystem corruption under some build conditions.
beaglebone: Implement workaround for broken U-Boot and kernel. (MEN-3952)
beaglebone: Remove U-Boot integration, which has not worked for a long time. U-Boot will still be used for booting, but GRUB will be used for integration with Mender, by chainloading via UEFI. (MEN-3952)
Install the latest Mender-client release (2.4.1) by default.

mender-convert 2.2.0

Released 09.16.2020

Statistics

A total of 436 lines added, 56 removed (delta 380)

Developers with the most changesets
Drew Moseley	12 (44.4%)
Lluis Campos	7 (25.9%)
Dell Green	2 (7.4%)
Kristian Amlie	2 (7.4%)
Marek Belisko	1 (3.7%)
Peter Grzybowski	1 (3.7%)
Ole Petter Orhagen	1 (3.7%)
Purushotham Nayak	1 (3.7%)

Developers with the most changed lines
Dell Green	309 (70.9%)
Drew Moseley	53 (12.2%)
Lluis Campos	25 (5.7%)
Ole Petter Orhagen	14 (3.2%)
Marek Belisko	13 (3.0%)
Purushotham Nayak	11 (2.5%)
Peter Grzybowski	8 (1.8%)
Kristian Amlie	3 (0.7%)

Top changeset contributors by employer
Northern.tech	23 (85.2%)
Ideaworks Ltd	2 (7.4%)
Cisco Systems, Inc.	1 (3.7%)
open-nandra	1 (3.7%)

Top lines changed by employer
Ideaworks Ltd	309 (70.9%)
Northern.tech	103 (23.6%)
open-nandra	13 (3.0%)
Cisco Systems, Inc.	11 (2.5%)

Employers with the most hackers (total 8)
Northern.tech	5 (62.5%)
Ideaworks Ltd	1 (12.5%)
open-nandra	1 (12.5%)
Cisco Systems, Inc.	1 (12.5%)

Changelogs

mender-convert (2.2.0)

New changes in mender-convert since 2.1.0:

Fix missed log messages.
Unmount filesystem images before creating full image.
Fix incorrect file ownership on artifact_info file
Extract debian package contents with sudo.
Probing of kernel and initrd now handles multiple instances and symlinks (MEN-3640)
Fix error when partitions numbers are not sequential
chmod 600 on mender.conf (MEN-3762)
Partition UUID support added for gpt/dos partition tables for deterministic booting (MEN-3725)
mender-convert-modify: Use sudo to copy DTBs.
raspberrypi: Do not overwrite existing kernel.
mender-convert-modify: Check is selinux is configured in enforce mode and force rootfs-relabel
Account for root ownership of overlay files.
Cleanup more bootloader files.
Allow for custom options when creating filesystems.
Allow for custom option when mounting filesystems.
Update mender-artifact to 3.4.0
Warn user when converting read-only file systems that would result in unstable checksums, making the image incompatible with Mender Delta updates. (MEN-3912)
Update mender client to 2.4.0

mender-convert 2.1.0

Released 07.16.2020

Statistics

A total of 845 lines added, 251 removed (delta 594)

Developers with the most changesets
Kristian Amlie	21 (36.2%)
Drew Moseley	14 (24.1%)
Ole Petter Orhagen	14 (24.1%)
Nate Baker	3 (5.2%)
Marek Belisko	2 (3.4%)
Lluis Campos	2 (3.4%)
Dell Green	1 (1.7%)
Sylvain	1 (1.7%)

Developers with the most changed lines
Ole Petter Orhagen	450 (52.9%)
Kristian Amlie	203 (23.9%)
Drew Moseley	80 (9.4%)
Marek Belisko	66 (7.8%)
Nate Baker	30 (3.5%)
Dell Green	18 (2.1%)
Lluis Campos	3 (0.4%)
Sylvain	1 (0.1%)

Top changeset contributors by employer
Northern.tech	51 (87.9%)
bakern@gmail.com	3 (5.2%)
open-nandra	2 (3.4%)
TideWise Ltda.	1 (1.7%)
Ideaworks Ltd	1 (1.7%)

Top lines changed by employer
Northern.tech	736 (86.5%)
open-nandra	66 (7.8%)
bakern@gmail.com	30 (3.5%)
Ideaworks Ltd	18 (2.1%)
TideWise Ltda.	1 (0.1%)

Employers with the most hackers (total 8)
Northern.tech	4 (50.0%)
open-nandra	1 (12.5%)
bakern@gmail.com	1 (12.5%)
Ideaworks Ltd	1 (12.5%)
TideWise Ltda.	1 (12.5%)

Changelogs

mender-convert (2.1.0)

New changes in mender-convert since 2.1.0b1:

Fix incorrect file ownership on artifact_info file
Extract debian package contents with sudo.
Fix missed log messages.
Unmount filesystem images before creating full image.
Upgrade to Mender 2.3.0 and mender-artifact 3.4.0.

New changes in mender-convert since 2.0.1:

Use consistent compression and archive naming.
Upgrade to GRUB 2.04.
Add detection of problematic versions of U-Boot and kernel. (MEN-2404)
Added color to the terminal log messages
Added hooks to Mender convert This extends the current functionality of the platform_ function functionality into using hooks, so that each modification step can be called from multiple configuration files. The valid hooks are:
PLATFORM_MODIFY_HOOKS
PLATFORM_PACKAGE_HOOKS
USER_LOCAL_MODIFY_HOOKS and can be appended to as a regular bash array.
Add COMFILE Pi config
Add support for GPT partition tables (MEN-2151)
Don't truncate output diskimage while writing partitions.
configs: Added ubuntu x86-64 hdd defconfig
Print improved error diagnostics before exiting on an error
Add the state scripts version file.
Ensure overlay files are owned by root.
Setting of version variable now works if project added as a git submodule (MEN-3475)
configs: Added generic x86-64 hdd defconfig
Added automatic decompression of input images, so that the convert tool now accepts compressed input images in the formats: lzma, gzip, and zip. The images will also be recompressed to the input format automatically. (MEN-3052)
add 'rootwait' to bootargs
grubenv: Handle debug command prompt when running as EFI app.
utilize regexp to dynamically set mender_grub_storage_device
Remove kernel_devicetree from EFI path. This information is not used when loading via UEFI, instead it is queried directly from the UEFI provider.
Fix 404 download errors when trying to run docker-build.
Upgrade mender-client to 2.3.0b1 and mender-artifact to 3.4.0b1.

mender-convert 2.0.1

Released 05.28.2020

Statistics

A total of 49 lines added, 36 removed (delta 13)

Developers with the most changesets
Nate Baker	3 (42.9%)
Kristian Amlie	2 (28.6%)
Lluis Campos	1 (14.3%)
Mirza Krak	1 (14.3%)

Developers with the most changed lines
Nate Baker	30 (42.3%)
Mirza Krak	25 (35.2%)
Kristian Amlie	14 (19.7%)
Lluis Campos	2 (2.8%)

Developers with the most lines removed
Mirza Krak	22 (61.1%)

Developers with the most signoffs (total 3)
Mirza Krak	3 (100.0%)

Top changeset contributors by employer
Northern.tech	4 (57.1%)
bakern@gmail.com	3 (42.9%)

Top lines changed by employer
Northern.tech	41 (57.7%)
bakern@gmail.com	30 (42.3%)

Employers with the most signoffs (total 3)
Northern.tech	3 (100.0%)

Employers with the most hackers (total 4)
Northern.tech	3 (75.0%)
bakern@gmail.com	1 (25.0%)

Changelogs

mender-convert (2.0.1)

New changes in mender-convert since 2.0.0:

Don't truncate output diskimage while writing partitions.
Fix 404 download errors when trying to run docker-build.

mender-convert 2.0.0

Released 03.06.2020

Statistics

A total of 3745 lines added, 4597 removed (delta -852)

Developers with the most changesets
Kristian Amlie	34 (30.4%)
Lluis Campos	25 (22.3%)
Ole Petter Orhagen	22 (19.6%)
Mirza Krak	19 (17.0%)
Drew Moseley	10 (8.9%)
Fabio Tranchitella	1 (0.9%)
Alf-Rune Siqveland	1 (0.9%)

Developers with the most changed lines
Mirza Krak	6195 (81.8%)
Kristian Amlie	442 (5.8%)
Ole Petter Orhagen	410 (5.4%)
Lluis Campos	237 (3.1%)
Drew Moseley	168 (2.2%)
Alf-Rune Siqveland	103 (1.4%)
Fabio Tranchitella	21 (0.3%)

Developers with the most lines removed
Mirza Krak	1369 (29.8%)

Developers with the most signoffs (total 1)
Kristian Amlie	1 (100.0%)

Top changeset contributors by employer
Northern.tech	112 (100.0%)

Top lines changed by employer
Northern.tech	7576 (100.0%)

Employers with the most signoffs (total 1)
Northern.tech	1 (100.0%)

Employers with the most hackers (total 7)
Northern.tech	7 (100.0%)

Changelogs

mender-convert (2.0.0)

New changes in mender-convert since 2.0.0b1:

Upgrade to GRUB 2.04.
Add detection of problematic versions of U-Boot and kernel. (MEN-2404)
Added hooks to Mender convert This extends the current functionality of the platform_ function functionality into using hooks, so that each modification step can be called from multiple configuration files. The valid hooks are:
PLATFORM_MODIFY_HOOKS
PLATFORM_PACKAGE_HOOKS
USER_LOCAL_MODIFY_HOOKS and can be appended to as a regular bash array.
Use consistent compression and archive naming.
Update to Mender 2.3.0 components
Added color to the terminal log messages

New changes in mender-convert since 1.2.2:

remove mender-convert (version 1)
add mender-convert (version 2) (MEN-2608)
Allow mender_local_config in current directory to be ignored by git.
bbb: Add support for eMMC as boot media.
configs: Support multiple config files on command line.
Fix "yellow" HDMI output on Raspbian Buster (MEN-2685)
scripts: Refactor to support different Mender server options.
Add support for Ubuntu Server images on Raspberry Pi 3
README: Clarify server types as alternatives.
modify: Add an extra function user_local_modify for end users to populate.
mender: Rename mender.service to mender-client.service
Add Raspberry Pi 0 WiFi support (MEN-2788)
Implement MENDER_COPY_BOOT_GAP feature (MEN-2784)
Raspberry Pi 3: Update U-Boot to 2019.01
Raspberry Pi 0 WiFi: Update U-Boot to 2019.01
Raspberry Pi: Add U-Boot version to image boot partition
Add support for Raspberry Pi 4 Model B
Make sure artifacts are owned by same user as the launch directory.
Changed the calculation of occupied space on the rootfs partition to a more accurate formula.
Add support for controlling rootfs size with IMAGE_* variables.
IMAGE_ROOTFS_SIZE - The base size of the rootfs. The other two variables modify this value
IMAGE_ROOTFS_EXTRA_SIZE - The amount of free space to add to the base size of the rootfs
IMAGE_OVERHEAD_FACTOR - Factor determining the amount of free space to add to the base size of the rootfs The final size will be the largest of the two calculations. Please see the mender_convert_config file comments for more information.
Add lzma compression option for MENDER_COMPRESS_DISK_IMAGE.
Bump mender-artifact version to 3.2.1.
Turn off default ext4 filesystem feature metadata_csum. This feature is not supported by tools on Ubuntu 16.04.
Change the output filename naming scheme to mender.img (MEN-3051)
mender-convert: Rename variables for consistency with meta-mender.
Fix certain kernels hanging on boot. In particular, recent versions of Debian for Beaglebone was affected, but several other boards using UEFI may also have been affected.
Make device_type specific to each Raspberry Pi model. (MEN-3165)
Switch to Mender 2.3.0b1 components.

mender-convert 1.2.2

Released 12.11.2019

Statistics

A total of 9 lines added, 10 removed (delta -1)

Developers with the most changesets
Lluis Campos	2 (100.0%)

Developers with the most changed lines
Lluis Campos	10 (100.0%)

Developers with the most lines removed
Lluis Campos	1 (10.0%)

Top changeset contributors by employer
Northern.tech	2 (100.0%)

Top lines changed by employer
Northern.tech	10 (100.0%)

Employers with the most hackers (total 1)
Northern.tech	1 (100.0%)

Changelogs

mender-convert (1.2.2)

New changes in mender-convert since 1.2.1:

Upgrade client and mender-artifact to 2.1.2 and 3.2.1, respectively

mender-convert 1.2.1

Released 10.24.2019

Statistics

A total of 27 lines added, 18 removed (delta 9)

Developers with the most changesets
Kristian Amlie	2 (40.0%)
Mirza Krak	2 (40.0%)
Simon Guigui	1 (20.0%)

Developers with the most changed lines
Kristian Amlie	13 (46.4%)
Simon Guigui	13 (46.4%)
Mirza Krak	2 (7.1%)

Developers with the most lines removed
Simon Guigui	1 (5.6%)

Top changeset contributors by employer
Northern.tech	4 (80.0%)
fyhertz@gmail.com	1 (20.0%)

Top lines changed by employer
Northern.tech	15 (53.6%)
fyhertz@gmail.com	13 (46.4%)

Employers with the most hackers (total 3)
Northern.tech	2 (66.7%)
fyhertz@gmail.com	1 (33.3%)

Changelogs

mender-convert (1.2.1)

New changes in mender-convert since 1.2.0:

Fix "yellow" HDMI output on Raspbian Buster (MEN-2685)
Upgrade client and mender-artifact to 2.1.1 and 3.2.0, respectively.
Fix some race conditions when running multiple instances of mender-convert in parallel

mender-convert 1.2.0

Released 09.17.2019

Statistics

A total of 268 lines added, 100 removed (delta 168)

Developers with the most changesets
Mirza Krak	10 (32.3%)
Lluis Campos	9 (29.0%)
Simon Ensslen	3 (9.7%)
Simon Gamma	3 (9.7%)
Manuel Zedel	2 (6.5%)
Eystein Måløy Stenberg	2 (6.5%)
Mario Kozjak	1 (3.2%)
Marek Belisko	1 (3.2%)

Developers with the most changed lines
Mirza Krak	199 (65.5%)
Manuel Zedel	36 (11.8%)
Lluis Campos	35 (11.5%)
Simon Ensslen	15 (4.9%)
Eystein Måløy Stenberg	10 (3.3%)
Simon Gamma	7 (2.3%)
Mario Kozjak	1 (0.3%)
Marek Belisko	1 (0.3%)

Developers with the most signoffs (total 1)
Yevgeniy Nurseitov	1 (100.0%)

Top changeset contributors by employer
Northern.tech	23 (74.2%)
Griesser AG	3 (9.7%)
github@survive.ch	3 (9.7%)
kozjakm1@gmail.com	1 (3.2%)
open-nandra	1 (3.2%)

Top lines changed by employer
Northern.tech	280 (92.1%)
Griesser AG	15 (4.9%)
github@survive.ch	7 (2.3%)
kozjakm1@gmail.com	1 (0.3%)
open-nandra	1 (0.3%)

Employers with the most signoffs (total 1)
enurseitov@gmail.com	1 (100.0%)

Employers with the most hackers (total 8)
Northern.tech	4 (50.0%)
Griesser AG	1 (12.5%)
github@survive.ch	1 (12.5%)
kozjakm1@gmail.com	1 (12.5%)
open-nandra	1 (12.5%)

Changelogs

mender-convert (1.2.0)

New changes in mender-convert since 1.2.0b1:

Update mender-convert to use Mender final release v2.1.0

New changes in mender-convert since 1.1.1:

Expand existing environment '$PATH' variable instead of replacing it
Use same environment '$PATH' variable when using sudo
Fail the docker build when mandatory build-arg 'mender_client_version' is not set.
Update Dockerfile to use latest stable mender-artifact, v2.4.0
Use mender-artfact v3. Requires rebuild of device-image-shell container.
Use LZMA for smaller Artifact size (but slower generation).
Update mender-convert to use final Mender v2.0 release
shrink expanded rootfs when running "from_raw_disk_image"
rpi: Bump u-boot version to fix booting on rpi0w after raspi-config resize partition (MEN-2436)
Instruct U-Boot to be able to boot either a compressed or an uncompressed kernel. This is very useful e.g. when switching from Debian (Raspbian) created using mender-convert to a Yocto based environment that does not compress the Kernel by default.
Implement feature (mender-convert needs option to build without server) (MEN-2590)
Since mender-convert now automatically resizes the input image, there is an additional step that is executed.
parameterize target architecture when creating Docker container
Update mender-convert to for Mender v2.0.1 release
Support for RockPro64 board
Fix console not being available on HDMI on Raspberry Pi in Raspbian Buster. (MEN-2673)
only install servert.crt.demo if --demo-host-ip/-i is set
add ServerCertificate entry in mender.conf if servert.crt was installed (MEN-2640)
install /etc/mender/script/version file
Update mender-convert to use Mender beta release v2.1.0b1

mender-convert 1.1.1

Released 07.01.2019

Statistics

A total of 26 lines added, 23 removed (delta 3)

Developers with the most changesets
Mirza Krak	2 (40.0%)
Lluis Campos	1 (20.0%)
Adam Podogrocki	1 (20.0%)
Marek Belisko	1 (20.0%)

Developers with the most changed lines
Mirza Krak	19 (47.5%)
Adam Podogrocki	17 (42.5%)
Lluis Campos	3 (7.5%)
Marek Belisko	1 (2.5%)

Developers with the most lines removed
Mirza Krak	14 (60.9%)

Top changeset contributors by employer
Northern.tech	3 (60.0%)
RnDity	1 (20.0%)
open-nandra	1 (20.0%)

Top lines changed by employer
Northern.tech	22 (55.0%)
RnDity	17 (42.5%)
open-nandra	1 (2.5%)

Employers with the most hackers (total 4)
Northern.tech	2 (50.0%)
RnDity	1 (25.0%)
open-nandra	1 (25.0%)

Changelogs

mender-convert (1.1.1)

New changes in mender-convert since 1.1.0:

rpi: Bump u-boot version to fix booting on rpi0w after raspi-config resize partition (MEN-2436)
shrink expanded rootfs when running "from_raw_disk_image"
Update mender-convert to for Mender v2.0.1 release

mender-convert 1.1.0

Released 05.08.2019

Statistics

A total of 1512 lines added, 996 removed (delta 516)

Developers with the most changesets
Mirza Krak	19 (27.5%)
Adam Podogrocki	16 (23.2%)
Eystein Måløy Stenberg	13 (18.8%)
Lluis Campos	9 (13.0%)
Marek Belisko	4 (5.8%)
Simon Gamma	3 (4.3%)
Max Bruckner	1 (1.4%)
Adrian Cuzman	1 (1.4%)
Dominik Adamski	1 (1.4%)
Mika Tuupola	1 (1.4%)

Developers with the most changed lines
Adam Podogrocki	853 (48.8%)
Eystein Måløy Stenberg	359 (20.5%)
Mirza Krak	301 (17.2%)
Lluis Campos	186 (10.6%)
Marek Belisko	37 (2.1%)
Simon Gamma	7 (0.4%)
Max Bruckner	1 (0.1%)
Adrian Cuzman	1 (0.1%)
Dominik Adamski	1 (0.1%)
Mika Tuupola	1 (0.1%)

Developers with the most lines removed
Mirza Krak	164 (16.5%)

Top changeset contributors by employer
Northern.tech	41 (59.4%)
RnDity	17 (24.6%)
open-nandra	4 (5.8%)
github@survive.ch	3 (4.3%)
max@maxbruckner.de	1 (1.4%)
adriancuzman@gmail.com	1 (1.4%)
tuupola@appelsiini.net	1 (1.4%)
denismosolov@gmail.com	1 (1.4%)

Top lines changed by employer
RnDity	854 (48.9%)
Northern.tech	846 (48.4%)
open-nandra	37 (2.1%)
github@survive.ch	7 (0.4%)
max@maxbruckner.de	1 (0.1%)
adriancuzman@gmail.com	1 (0.1%)
tuupola@appelsiini.net	1 (0.1%)
denismosolov@gmail.com	1 (0.1%)

Employers with the most hackers (total 11)
Northern.tech	3 (27.3%)
RnDity	2 (18.2%)
open-nandra	1 (9.1%)
github@survive.ch	1 (9.1%)
max@maxbruckner.de	1 (9.1%)
adriancuzman@gmail.com	1 (9.1%)
tuupola@appelsiini.net	1 (9.1%)
denismosolov@gmail.com	1 (9.1%)

Changelogs

mender-convert (1.1.0)

New changes in mender-convert since 1.1.0b1:

Expand existing environment '$PATH' variable instead of replacing it
Use same environment '$PATH' variable when using sudo
Fail the docker build when mandatory build-arg 'mender_client_version' is not set.
Update Dockerfile to use latest stable mender-artifact, v2.4.0
Use mender-artfact v3. Requires rebuild of device-image-shell container.
Use LZMA for smaller Artifact size (but slower generation).
Update mender-convert to use final Mender v2.0 release

New changes in mender-convert since 1.0.0:

Fix syntax error when calling "mender-convert raw-disk-image-shrink-rootfs"
Experimental device emulation environment
Create repartitioned Mender compliant image from Yocto image for qemu x86-64 (MEN-2207)
Add commits check to mender-convert repo (MEN-2282)
Provide systemd service for Raspberry Pi boards to resize data partition (MEN-2254)
Install Mender related files to Mender image based on Yocto image for qemu x86-64 (MEN-2207)
Check a Linux ext4 file system before resizing 'primary' partition (MEN-2242)
compile mender during docker image creation
Switch to 1.6.0 Mender client as default for docker environment
Add license check to mender-convert repo (MEN-2282)
Use a toolchain tuned for ARMv6 architecture to maintain support for Raspberry Pi Zero (MEN-2399)
Fix docker-mender-convert for paths with spaces
Add version option for mender convert (MEN-2257)
Fix permission denied error in when calling "mender-convert raw-disk-image-shrink-rootfs"
Give container access to host's kernel modules (MEN-2255)
Support compiling Mender client in mender-convert container.
Document missing options in the scripts (MEN-2248)
Store sector size in raw/mender disk image related arrays (MEN-2242)
Avoid duplicate content in cmdline.txt
rpi: update to 2018.07 U-boot (MEN-2198)
Add --storage-total-size-mb option to mender-convert tool (MEN-2242)
Make tool ready for handling input images containing 3 partitions (MEN-2207)
Allow to use "--demo" flag with any given server type
Use local (checked out) version of mender-convert inside container
Support passing mender-convert arguments to docker-mender-convert directly
remove expert commands
Refactor mender-convert to use make install target (MEN-2411)
Improve documentation
Set production/demo intervals conditionally (MEN-2248)
Optimizations to speed up conversion, utilizing sparse images.
remove dependency on gcc6
Install GRUB bootloader to Mender image based on Yocto image for qemu x86-64 (MEN-2207)

mender-convert 1.0.0

Released 12.13.2018

Statistics

A total of 4848 lines added, 1459 removed (delta 3389)

Developers with the most changesets
Adam Podogrocki	32 (45.1%)
Dominik Adamski	18 (25.4%)
Eystein Måløy Stenberg	13 (18.3%)
Mirza Krak	6 (8.5%)
Mika Tuupola	1 (1.4%)
Pierre-Jean Texier	1 (1.4%)

Developers with the most changed lines
Adam Podogrocki	4297 (87.0%)
Eystein Måløy Stenberg	324 (6.6%)
Dominik Adamski	241 (4.9%)
Mirza Krak	74 (1.5%)
Mika Tuupola	1 (0.0%)
Pierre-Jean Texier	1 (0.0%)

Developers with the most lines removed
Mirza Krak	33 (2.3%)

Developers with the most signoffs (total 70)
Adam Podogrocki	31 (44.3%)
Dominik Adamski	18 (25.7%)
Eystein Måløy Stenberg	13 (18.6%)
Mirza Krak	6 (8.6%)
Mika Tuupola	1 (1.4%)
Pierre-Jean Texier	1 (1.4%)

Top changeset contributors by employer
RnDity	50 (70.4%)
Northern.tech	19 (26.8%)
tuupola@appelsiini.net	1 (1.4%)
Lafon Technologies	1 (1.4%)

Top lines changed by employer
RnDity	4538 (91.9%)
Northern.tech	398 (8.1%)
tuupola@appelsiini.net	1 (0.0%)
Lafon Technologies	1 (0.0%)

Employers with the most signoffs (total 70)
RnDity	49 (70.0%)
Northern.tech	19 (27.1%)
tuupola@appelsiini.net	1 (1.4%)
Lafon Technologies	1 (1.4%)

Employers with the most hackers (total 6)
RnDity	2 (33.3%)
Northern.tech	2 (33.3%)
tuupola@appelsiini.net	1 (16.7%)
Lafon Technologies	1 (16.7%)

Changelogs

mender-convert (1.0.0)

Initial release of mender-convert! Some developer versions were tested along the way, so here is the changelog since then:

Make tool ready for handling input images containing 3 partitions (MEN-2207)
Support passing mender-convert arguments to docker-mender-convert directly
Switch to 1.6.0 Mender client as default for docker environment
Use local (checked out) version of mender-convert inside container
Support compiling Mender client in mender-convert container.
compile mender during docker image creation
Install GRUB bootloader to Mender image based on Yocto image for qemu x86-64 (MEN-2207)
fix image paths printed at end of conversion
Docker environment for running mender-convert
Create repartitioned Mender compliant image from Yocto image for qemu x86-64 (MEN-2207)
Avoid duplicate content in cmdline.txt
Install Mender related files to Mender image based on Yocto image for qemu x86-64 (MEN-2207)
Increase default server retry interval from 1 to 30 seconds.
Add version option for mender convert (MEN-2257)

We welcome contributions to improve this documentation. To submit a change, use the Edit link at the top of the page or email us at .

mender-convert 4.2.2

Changelogs

mender-convert (4.2.2)

Bug Fixes

mender-convert 4.2.1

Changelogs

mender-convert (4.2.1)

Bug Fixes

mender-convert 4.2.0

Changelogs

mender-convert (4.2.0)

Bug Fixes

Features

Other

mender-convert 4.1.1

Statistics

Changelogs

mender-convert (4.1.1)

mender-convert 4.1.0

Statistics

Changelogs

mender-convert (4.1.0)

Bug Fixes

Features

mender-convert 4.0.3

Statistics

Changelogs

mender-convert (4.0.3)

Bug Fixes

mender-convert 4.0.2

Statistics

Changelogs

mender-convert (4.0.2)

Bug Fixes

Other

mender-convert 4.0.1

Statistics

Changelogs

mender-convert (4.0.1)

Bug Fixes

mender-convert 4.0.0

Statistics

Changelogs

mender-convert (4.0.0)

Bug Fixes

Features

mender-convert 3.0.2

Statistics

Changelogs

mender-convert (3.0.2)

Bug Fixes

mender-convert 3.0.1

Statistics

Changelogs

mender-convert (3.0.1)

Bug Fixes

mender-convert 3.0.0

Statistics

Changelogs

mender-convert (3.0.0)

Dependabot bumps

mender-convert 2.6.2

Statistics

Changelogs

mender-convert (2.6.2)

mender-convert 2.6.1

Statistics

Changelogs

mender-convert (2.6.1)

mender-convert 2.6.0

Statistics

Changelogs

mender-convert (2.6.0)

Commits

Commits

mender-convert 2.5.3

Statistics

Changelogs

mender-convert (2.5.3)