U-Boot

This section describes the steps needed to integrate with U-Boot for Yocto Project. Most steps are automated, but there are a few things that need to be in place for this to function.

Enabling U-Boot

If U-Boot integration is not already enabled, you can enable it by adding the snippet below to your build configuration. For instance, in your local.conf:

MENDER_FEATURES_ENABLE:append = " mender-uboot mender-image-sd"
MENDER_FEATURES_DISABLE:append = " mender-grub mender-image-uefi"

See the documentation on features for more information.

Forks of U-boot

If the project is using a board supported by upstream U-Boot, and the build is using the u-boot recipe as the bootloader provider, then you can skip to the next section. You can check if the board is using a u-boot fork with the following command (executed in the Yocto build directory):

bitbake -e core-image-minimal | egrep '^PREFERRED_PROVIDER_(virtual/bootloader|u-boot)='

If any variables appear, and any one of them has a value other than u-boot or empty, then the build is using a U-Boot fork.

If the project is using a fork of U-Boot, some additional steps are required. Typically this happens if one of the layers the project depends on has its own u-boot-<suffix> recipe somewhere. If so you need to carry out these steps:

1. The recipe needs to include u-boot-mender.inc, in order to incorporate the patches needed for Mender to work. This should go into the .bb file of the recipe for the U-Boot fork:

   require recipes-bsp/u-boot/u-boot-mender.inc

2. Mender has a dependency on u-boot, but the project's U-Boot likely has another name, therefore it is important to mark the project's fork as a component that provides u-boot. The example below shows how to add the needed directives in the .bb file of the U-Boot fork.

   PROVIDES += "u-boot"
   RPROVIDES_${PN} += "u-boot"

3. In the machine section of the board, you need to select the actual u-boot implementation using PREFERRED_PROVIDER, like this:

   PREFERRED_PROVIDER_u-boot = "u-boot-my-fork"

   Many machine configurations will probably have this in their setup already.

Enabling U-Boot

To utilize Mender's integration with U-Boot, when building with the Yocto Project you need to enable the mender-uboot feature using MENDER_FEATURES_ENABLE. For instance, in your local.conf:

MENDER_FEATURES_ENABLE:append = " mender-uboot"

This enables U-Boot integration, and also enables full automatic patching of U-Boot.

Unfortunately, because of the great variation in U-Boot board code, the automatic patching process does not always succeed or produce a working boot loader, even if the above criteria are met. The symptoms are either that one of the u-boot recipes produce compile errors, or that the board does not boot using the modified bootloader. If this happens, or if you are using an older Yocto Project branch, there will be some manual work required in order to produce a working integration patch.

Please see Manual U-Boot integration for more information.